Steyr 4-speed PTO with 430/540/540E/1000rpm

All STEYR Multi-Trac models in the 9000 MT range are fitted with four PTO speeds as standard. This is engaged electro-hydraulically with soft start under load and power is transferred without loss of efficiency. The PTO speed of 430 rpm is especially suitable for simultaneous mowing and loading operations. The new STEYR tractor monitor indicates the selected speed range and the current PTO speed.

Rear PTO for a wide range of applications
The rear PTO clutch is activated mechanically or electro-hydraulically, and responds extremely sensitively. Power from the engine to the rear PTO is transferred without loss of efficiency. Operations requiring full engine output are catered for by the 430, 540 and 1000 rpm speeds. Work within the partial load range is performed with 540 rpm at 65% of rated engine speed (540E). If the PTO is already engaged when the tractor is started up, an automatic safety interlock prevents risk of accidents.

PTO management for even greater control comfort
When operating the rear power lift, the PTO management system greatly simplifies turning manoeuvres at the headland by automatically disengaging and re-engaging the PTO as the implement is raised and lowered.

Ground speed/stationary operation PTO
In travel mode, the ground speed PTO can be engaged in all field gears – forward and reverse. For stationary work, external fender mounted switches allow the operator to start and stop the rear pto in safety whilst standing outside the vehicle.

Direct drive front PTO

*) to comply with legislation and specification in your country.