|
Depending on operational requirements, the heavy-duty
STEYR power lift can be
fitted with either an EHR or ELR electro-hydraulic control system. Both
systems
meet all present-day demands, and have a lifting capacity of max. 4900
kg. All
operator controls are conveniently placed within easy reach on the right
of the
driver, and the key hitch functions can be operated using the Multicontroller.
 Heavy-duty
hydraulics for maximum lifting capacity
The lifting mechanism has its own hydraulic circuit with a micro filter
on the inlet side. At a pressure of 175 bar, the hydraulic pump supplies
50 l/min. All models have a max. lifting capacity of 4900 kp. The classic
STEYR hitch structure and linkage geometry provide an unusually high continuous
lifting power. When operating front loaders, or hydrostatic-motor driven
implements, STEYR offer a hydraulic pump with a delivery rate of 86 l/min
and load sensing remote valves.
Fender-mounted hitch controls and up to 5 remote valves
Implements can be
hooked up and removed quickly and easily using the fender-mounted controls, and
only one hand is needed to connect up to the remote valves, even when they are under
pressure. Up to 5 remote valves single-acting or double-acting circuits can be
supplied.
EFH
front power lift - ideal in combination with the front PTO
The chassis-mounted front hydraulics feature detachable lower links
and pickup hooks with safety bolts, shoulder dimension Cat. II. For front-mounted
implements requiring especially accurate ground adaptation, the lower
links can be changed from the fixed to the floating position. Front hydraulics
with optional down-force pressure (double-acting cylinder).
Dynamic
ride control
After raising the implement this system is activated when the driving
speed reaches 8 kph. All oscillations caused by heavy mounted implements
when travelling at speed are neutralised to minimise bouncing.
STEYR multi-controller
STEYR crossgate lever*
Chassis mounted front hydraulics
Axle mounted front hydraulics
*) to comply with legislation and specification in your
country.
|
